Skoda with the DCM6.2
- Vehicle brand
- Skoda
- Engine variants
- 17
- Supported solutions
- 11
- Mapped DTC codes
- 943
The Delphi DCM6.2 is fitted to 17 recorded Skoda engine variants. Full technical detail for the control unit itself is on the DCM6.2 ECU page.
Skoda variants with the DCM6.2
Recorded from real files — each line is a variant Map Decoder has actually seen with this ECU.
- Skoda Ateca 1.6 TDI
- Skoda Fabia 1.4
- Skoda Fabia 1.4 TDI
- Skoda Fabia 1.4 TDI 90hp
- Skoda Fabia 1.4 TDI CR 75hp
- Skoda Fabia 1.4 TDI CR 90hp
- Skoda Fabia 1.4 TDI EU6
- Skoda Fabia 2 1.4 TDI
- Skoda Kamiq 1.6 TDI
- Skoda Kamiq 1.6 TDI 115hp
- Skoda Karoq 1.6 TDI
- Skoda Karoq 1.6 TDI 116hp
- Skoda Octavia 1.6 TDI
- Skoda Octavia 1.6 TDI CR 115hp
- Skoda Octavia 2 1.6 TDI
- Skoda Rapid 1.4 TDI
- Skoda Scala 1.6 TDI
Solutions for Skoda DCM6.2
Skoda DCM6.2 DTC codes
Map Decoder holds 943 diagnostic trouble codes for the Skoda DCM6.2. Each entry stores the address and the byte values measured on a real file.
P0001P0002P0003P0004P0010P0011P0016P0017P0030P0031P0032P0036P0037P0038P0045P0047P0048P004AP004CP004DP0069P0071P0072P0073
Other Skoda ECUs
- Bosch EDC17C4633 variants
- Bosch EDC17C7429 variants
- Bosch MED17.5.2527 variants
- Bosch EDC17C6423 variants
- Bosch EDC17CP1419 variants
- Continental SIMOS1817 variants
- Bosch MD1CS00415 variants
- Bosch MG1CS01115 variants
- Continental PCR2.114 variants
- Bosch MED17.5.2112 variants
- Bosch MG1CS1117 variants
- Bosch MED17.5.206 variants
Skoda Delphi DCM6.2 — frequently asked questions
Which Skoda models use the DCM6.2?
17 Skoda engine variants are recorded with this control unit, including Ateca, Fabia, Kamiq, Karoq, Octavia, Rapid and Scala.
What can Map Decoder do on a Skoda DCM6.2 file?
Validated operations for this ECU: AdBlue / SCR Off, Additive (Eolys) Off, Catalyst Off, DPF Off, EGR Off, Lambda / O2, MAF Off, NOx Off, Speed Limiter (VMAX) Off, Stage 1 and Throttle Valve (TVA).
Are DTC codes available for the Skoda DCM6.2?
Yes — 943 diagnostic trouble codes are mapped for this ECU, each with the address and byte values measured on a real file.
Is checksum correction handled on Skoda DCM6.2 files?
Yes. Checksums for the regions a patch changes are recalculated during patch generation.
Work on Skoda Delphi DCM6.2 files
Map Decoder analyses Skoda Delphi DCM6.2 files, detects the maps and generates a verified patch with the checksum corrected.