Diagnostic data for the EDC16C9
- Manufacturer
- Bosch
- Mapped codes
- 118
- With description
- 76
Map Decoder stores 118 distinct diagnostic trouble codes for the Bosch EDC16C9. Each one carries the address and the byte values measured on a real file, which is what lets a removal write the value the ECU actually expects instead of a guessed constant. See DTC removal for the workflow.
EDC16C9 diagnostic trouble codes
| Code | Description |
|---|---|
P0001 | — |
P0002 | Fuel volume regulator control -circuit range/performance |
P0003 | Fuel volume regulator control -circuit low |
P0004 | Fuel volume regulator control -circuit high |
P0016 | Crankshaft position/camshaft position, bank 1 sensor A -correlation |
P0030 | Heated oxygen sensor (HO2S) 1, bank 1, heater control -circuit malfunction |
P0070 | Outside air temperature sensor -circuit malfunction |
P0087 | Fuel rail/system pressure too low |
P0088 | Fuel rail/system pressure too high |
P0090 | Fuel metering solenoid -open circuit |
P0100 | Mass air flow (MAF) sensor/volume air flow (VAF) . sensor circuit malfunction |
P0105 | Manifold absolute pressure (MAP) sensor barometric pressure (BARO) sensor -circuit malfunction |
P0110 | Intake air temperature (IAT) sensor -circuit malfunction |
P0115 | Engine coolant temperature -(ECT) sensor circuit malfunction |
P0130 | Heated oxygen sensor (HO2S) 1, bank 1 -circuit malfunction |
P0168 | Fuel temperature too high |
P0180 | Fuel temperature sensor A -circuit malfunction |
P0190 | Fuel rail pressure (FRP) sensor -circuit malfunction |
P0195 | Engine oil temperature (EOT) sensor -circuit malfunction |
P0201 | Injector 1 -circuit malfunction |
P0202 | Injector 2 -circuit malfunction |
P0203 | Injector 3 -circuit malfunction |
P0204 | Injector 4 -circuit malfunction |
P0205 | Injector 5 -circuit malfunction |
P0206 | Injector 6 -circuit malfunction |
P0219 | Engine over speed condition |
P0230 | Fuel pump relay -circuit malfunction |
P0234 | Engine boost condition -limit exceeded |
P0243 | Turbocharger (TC) wastegate regulating valve A circuit malfunction |
P0262 | Injector 1 -circuit high |
P0265 | Injector 2 -circuit high |
P0268 | Injector 3 -circuit high |
P0271 | Injector 4 -circuit high |
P0274 | Injector 5 -circuit high |
P0277 | Injector 6 -circuit high |
P0300 | Random/multiple cylinder(s) -misfire detected |
P0301 | Cylinder 1 -misfire detected |
P0302 | Cylinder 2 -misfire detected |
P0303 | Cylinder 3 -misfire detected |
P0304 | Cylinder 4 -misfire detected |
P0305 | Cylinder 5 -misfire detected |
P0306 | Cylinder 6 -misfire detected |
P0335 | Crankshaft position (CKP) sensor -circuit malfunction |
P0340 | Camshaft position (CMP) sensor A, bank 1 circuit malfunction |
P0380 | Glow plugs, circuit A -malfunction |
P0381 | Glow plug warning lamp -circuit malfunction |
P0400 | Exhaust gas recirculation (EGR) system -flow malfunction |
P0425 | Catalytic converter temperature sensor, bank 1 |
P0460 | Fuel tank level sensor -circuit malfunction |
P0500 | Vehicle speed sensor (VSS) -circuit malfunction |
P0530 | AC refrigerant pressure sensor -circuit malfunction |
P0560 | System voltage malfunction |
P0602 | Engine control module (ECM) -programming error |
P0606 | Engine control module (ECM)/powertrain control module (PCM) -processor fault |
P0615 | Starter motor relay -circuit malfunction |
P0620 | Alternator, control -circuit malfunction |
P0621 | Alternator warning lamp -circuit malfunction |
P0622 | Alternator, field control -circuit malfunction |
P0638 | Throttle actuator control, bank 1 -range/performance problem |
P0641 | Sensor reference voltage A -circuit open |
P0650 | Malfunction indicator lamp (MIL) -circuit malfunction |
P0651 | Sensor reference voltage B -circuit open |
P0697 | Sensor reference voltage C -circuit open |
P0700 | Transmission control system -malfunction |
P0703 | Torque converter/brake switch B -circuit malfunction |
P0704 | Clutch pedal position(CPP) switch -circuit malfunction |
P0960 | Pressure control (PC) solenoid A -control circuit open |
P0961 | Pressure control (PC) solenoid A -control circuit range/performance |
P1105 | — |
P1109 | — |
P1110 | — |
P1120 | — |
P1122 | — |
P1125 | — |
P1180 | — |
P1400 | — |
P1481 | — |
P1482 | — |
P1483 | — |
P1530 | — |
P1560 | — |
P1590 | — |
P1600 | — |
P1603 | — |
P1604 | — |
P1610 | — |
P1611 | — |
P1613 | — |
P1614 | — |
P1615 | — |
P1616 | — |
P1625 | — |
P1650 | — |
P1657 | — |
P1700 | — |
P1810 | — |
P1811 | — |
P1813 | — |
P1815 | — |
P1895 | — |
P1900 | — |
P1901 | — |
P1902 | — |
P1904 | — |
P2146 | Fuel Injector Group 'A' Supply Voltage Circuit/Open |
P2147 | Fuel Injector Group 'A' Supply Voltage Circuit Low |
P2149 | Fuel Injector Group 'B' Supply Voltage Circuit/Open |
P2150 | Fuel Injector Group 'B' Supply Voltage Circuit Low |
P2237 | O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1 |
P2244 | O2 Sensor Reference Voltage Performance Bank 1 Sensor 1 |
P2251 | O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1 |
P2264 | Water in Fuel Sensor Circuit |
P2279 | Intake Air System Leak |
U2101 | — |
U2103 | — |
U2106 | — |
U2108 | — |
U2139 | — |
Bosch EDC16C9 DTC codes — frequently asked questions
How many DTC codes does Map Decoder have for the EDC16C9?
118 distinct diagnostic trouble codes, 76 of them with a description.
Where do these codes come from?
Each entry was measured on a real file: the address, the enabled value and the disabled value were read from an original and a modified binary. Nothing here is a generic OBD-II lookup table.
Can these codes be switched off on the EDC16C9?
Yes — Map Decoder writes the value that was observed on this ECU rather than a guessed constant, and corrects the checksum afterwards.
Remove DTC codes on Bosch EDC16C9
Map Decoder analyses Bosch EDC16C9 files, detects the maps and generates a verified patch with the checksum corrected.