ECU overview
- ECU manufacturer
- Bosch
- ECU family
- EDC17
- ECU model
- EDC17C58
- Supported solutions
- 5
- Mapped DTC codes
- 286
- Vehicle brands
- Honda
The Bosch EDC17C58 is part of the EDC17 generation from Bosch. In the Map Decoder database it is linked to Honda vehicles. Coverage for this ECU is built from 12 stored modifications learned on real original and modified files.
What Map Decoder can do on an EDC17C58 file
Every operation below is backed by a stored, verified modification for EDC17C58. Nothing is listed that the software cannot actually perform on this ECU.
DPF Off
Removes diesel particulate filter regeneration and monitoring logic from EDC17C58 files.
EGR Off
Disables exhaust gas recirculation control in EDC17C58 calibrations, including the related fault reporting.
Lambda / O2
Disables lambda / O2 sensor monitoring in EDC17C58 without breaking fuelling.
MAF Off
Removes mass air flow sensor dependency and its diagnostics from EDC17C58.
Throttle Valve (TVA)
Disables throttle valve actuator control and monitoring in EDC17C58.
Map detection and patch generation for EDC17C58
Map detection
Upload an original EDC17C58 read. Map Decoder locates the relevant calibration tables automatically instead of relying on a fixed address list, so files from different software versions are handled.
Patch generation
A stored modification is only offered when it fits your binary. Region similarity and anchor signatures are checked against the uploaded file first, so a change learned on one software version is never blindly written to another.
Checksum correction
Checksums covering the regions a patch touches are recalculated as part of patch generation, so the ECU accepts the modified flash.
EDC17C58 DTC codes
Map Decoder holds 286 diagnostic trouble codes for the EDC17C58. Each entry stores the address and the byte values measured on a real file.
P0033P0034P0035P0045P0047P0048P0053P0054P0069P0087P0088P0090P0091P0092P0097P0098P009BP00AFP00B9P00BCP00BDP00C9P00CAP0102
Other EDC17 ECUs
- Bosch EDC17C499 solutions · 2,400 DTC
- Bosch EDC17C6011 solutions · 467 DTC
- Bosch EDC17C649 solutions · 1,075 DTC
- Bosch EDC17C669 solutions · 671 DTC
- Bosch EDC17C6911 solutions · 2,366 DTC
- Bosch EDC17C708 solutions · 628 DTC
- Bosch EDC17C748 solutions · 1,208 DTC
- Bosch EDC17C8410 solutions · 582 DTC
- Bosch EDC17CP108 solutions · 476 DTC
- Bosch EDC17CP4410 solutions · 1,045 DTC
- Bosch EDC17CP458 solutions · 2,351 DTC
- Bosch EDC17CP578 solutions · 685 DTC
Vehicle brands using the EDC17C58
- Honda31 variants
EDC17C58 solutions by vehicle brand
- Honda Lambda / O26 ECUs · 89 variants
- Honda MAF Off6 ECUs · 89 variants
- Honda Throttle Valve (TVA)6 ECUs · 89 variants
- Honda DPF Off5 ECUs · 73 variants
- Honda EGR Off5 ECUs · 73 variants
Bosch EDC17C58 — frequently asked questions
What is the Bosch EDC17C58?
The EDC17C58 is an engine control unit produced by Bosch, part of the EDC17 generation. It is used in Honda vehicles.
Can Map Decoder identify maps in EDC17C58 files?
Yes. Upload an original read and the relevant calibration tables are located automatically. The result is verified against the binary before any patch is offered, so a mismatched file is rejected rather than silently patched.
Which operations are supported for the Bosch EDC17C58?
Validated operations for this ECU: DPF Off, EGR Off, Lambda / O2, MAF Off and Throttle Valve (TVA). They come from 12 stored modifications learned on real files.
Does Map Decoder support DTC removal on the EDC17C58?
Yes. 286 diagnostic trouble codes are mapped for this ECU, each with the address and the byte values measured on a real file rather than a guessed constant.
Does Map Decoder correct the checksum after patching an EDC17C58 file?
Yes. Checksums covering the regions a patch changes are recalculated during patch generation, so the modified file is accepted by the ECU.
Work on Bosch EDC17C58 files
Map Decoder analyses Bosch EDC17C58 files, detects the maps and generates a verified patch with the checksum corrected.