Map Decoder

Bosch EDC17CP20 ECU Solutions

Map detection, patch generation and the tuning operations Map Decoder actually supports on the Bosch EDC17CP20 engine control unit.

ECU overview

ECU manufacturer
Bosch
ECU family
EDC17
ECU model
EDC17CP20
Supported solutions
6
Mapped DTC codes
640
Vehicle brands
Audi, Porsche, Seat, Skoda, VW

The Bosch EDC17CP20 is part of the EDC17 generation from Bosch. In the Map Decoder database it is linked to Audi, VW, Seat, Skoda and Porsche vehicles. Coverage for this ECU is built from 468 stored modifications learned on real original and modified files.

Supported solutions

What Map Decoder can do on an EDC17CP20 file

Every operation below is backed by a stored, verified modification for EDC17CP20. Nothing is listed that the software cannot actually perform on this ECU.

DPF Off

Removes diesel particulate filter regeneration and monitoring logic from EDC17CP20 files.

EGR Off

Disables exhaust gas recirculation control in EDC17CP20 calibrations, including the related fault reporting.

Lambda / O2

Disables lambda / O2 sensor monitoring in EDC17CP20 without breaking fuelling.

MAF Off

Removes mass air flow sensor dependency and its diagnostics from EDC17CP20.

NOx Off

Disables NOx sensor monitoring and the associated fault paths in EDC17CP20.

Throttle Valve (TVA)

Disables throttle valve actuator control and monitoring in EDC17CP20.

How it works

Map detection and patch generation for EDC17CP20

Map detection

Upload an original EDC17CP20 read. Map Decoder locates the relevant calibration tables automatically instead of relying on a fixed address list, so files from different software versions are handled.

Patch generation

A stored modification is only offered when it fits your binary. Region similarity and anchor signatures are checked against the uploaded file first, so a change learned on one software version is never blindly written to another.

Checksum correction

Checksums covering the regions a patch touches are recalculated as part of patch generation, so the ECU accepts the modified flash.

DTC

EDC17CP20 DTC codes

Map Decoder holds 640 diagnostic trouble codes for the EDC17CP20. Each entry stores the address and the byte values measured on a real file.

  • C037C
  • C03FA
  • C04CE
  • C04CF
  • C04D0
  • C070E
  • C092A
  • C0D6D
  • C0EDA
  • C0EDB
  • C0EDC
  • C0EDD
  • P0001
  • P0008
  • P0016
  • P0045
  • P0047
  • P0048
  • P0071
  • P0072
  • P0073
  • P0087
  • P0088
  • P008A

All 640 EDC17CP20 DTC codes

Related ECUs

Other EDC17 ECUs

Vehicles

Vehicle brands using the EDC17CP20

Brand + solution

EDC17CP20 solutions by vehicle brand

Related families

Other Bosch ECU families

FAQ

Bosch EDC17CP20 — frequently asked questions

What is the Bosch EDC17CP20?

The EDC17CP20 is an engine control unit produced by Bosch, part of the EDC17 generation. It is used in Audi, Porsche, Seat, Skoda and VW vehicles.

Can Map Decoder identify maps in EDC17CP20 files?

Yes. Upload an original read and the relevant calibration tables are located automatically. The result is verified against the binary before any patch is offered, so a mismatched file is rejected rather than silently patched.

Which operations are supported for the Bosch EDC17CP20?

Validated operations for this ECU: DPF Off, EGR Off, Lambda / O2, MAF Off, NOx Off and Throttle Valve (TVA). They come from 468 stored modifications learned on real files.

Does Map Decoder support DTC removal on the EDC17CP20?

Yes. 640 diagnostic trouble codes are mapped for this ECU, each with the address and the byte values measured on a real file rather than a guessed constant.

Does Map Decoder correct the checksum after patching an EDC17CP20 file?

Yes. Checksums covering the regions a patch changes are recalculated during patch generation, so the modified file is accepted by the ECU.

Work on Bosch EDC17CP20 files

Map Decoder analyses Bosch EDC17CP20 files, detects the maps and generates a verified patch with the checksum corrected.

Talk to UsSee Pricing