ECU overview
The Bosch MDG1_MD1CP002 is part of the MDG1 generation from Bosch. In the Map Decoder database it is linked to BMW and Mini vehicles. Coverage for this ECU is built from 14 stored modifications learned on real original and modified files.
What Map Decoder can do on an MDG1_MD1CP002 file
Every operation below is backed by a stored, verified modification for MDG1_MD1CP002. Nothing is listed that the software cannot actually perform on this ECU.
AdBlue / SCR Off
Turns off the SCR / AdBlue dosing strategy and its countdown logic in MDG1_MD1CP002.
Additive (Eolys) Off
Disables the fuel additive (Eolys) system and its level monitoring in MDG1_MD1CP002.
DPF Off
Removes diesel particulate filter regeneration and monitoring logic from MDG1_MD1CP002 files.
EGR Off
Disables exhaust gas recirculation control in MDG1_MD1CP002 calibrations, including the related fault reporting.
Lambda / O2
Disables lambda / O2 sensor monitoring in MDG1_MD1CP002 without breaking fuelling.
MAF Off
Removes mass air flow sensor dependency and its diagnostics from MDG1_MD1CP002.
NOx Off
Disables NOx sensor monitoring and the associated fault paths in MDG1_MD1CP002.
Map detection and patch generation for MDG1_MD1CP002
Map detection
Upload an original MDG1_MD1CP002 read. Map Decoder locates the relevant calibration tables automatically instead of relying on a fixed address list, so files from different software versions are handled.
Patch generation
A stored modification is only offered when it fits your binary. Region similarity and anchor signatures are checked against the uploaded file first, so a change learned on one software version is never blindly written to another.
Checksum correction
Checksums covering the regions a patch touches are recalculated as part of patch generation, so the ECU accepts the modified flash.
MDG1_MD1CP002 DTC codes
Map Decoder holds 421 diagnostic trouble codes for the MDG1_MD1CP002. Each entry stores the address and the byte values measured on a real file.
P0001P0002P0003P0004P0016P0030P0031P0032P0033P0034P0035P0036P0037P0038P0039P0045P0046P0047P0048P004AP004BP004CP004DP0071
Other MDG1 ECUs
- Bosch MDG1CP0021,586 DTC
- Bosch MDG1_MD1CP0329 solutions · 1,813 DTC
MDG1_MD1CP002 solutions by vehicle brand
- BMW Lambda / O216 ECUs · 2040 variants
- BMW MAF Off14 ECUs · 1866 variants
- BMW DPF Off12 ECUs · 1138 variants
- BMW EGR Off12 ECUs · 1138 variants
- BMW NOx Off7 ECUs · 800 variants
- BMW AdBlue / SCR Off6 ECUs · 714 variants
- Mini Lambda / O214 ECUs · 206 variants
- Mini MAF Off12 ECUs · 206 variants
- Mini DPF Off11 ECUs · 109 variants
- Mini EGR Off11 ECUs · 109 variants
- Mini NOx Off6 ECUs · 96 variants
- Mini AdBlue / SCR Off5 ECUs · 35 variants
Bosch MDG1_MD1CP002 — frequently asked questions
What is the Bosch MDG1_MD1CP002?
The MDG1_MD1CP002 is an engine control unit produced by Bosch, part of the MDG1 generation. It is used in BMW and Mini vehicles.
Can Map Decoder identify maps in MDG1_MD1CP002 files?
Yes. Upload an original read and the relevant calibration tables are located automatically. The result is verified against the binary before any patch is offered, so a mismatched file is rejected rather than silently patched.
Which operations are supported for the Bosch MDG1_MD1CP002?
Validated operations for this ECU: AdBlue / SCR Off, Additive (Eolys) Off, DPF Off, EGR Off, Lambda / O2, MAF Off and NOx Off. They come from 14 stored modifications learned on real files.
Does Map Decoder support DTC removal on the MDG1_MD1CP002?
Yes. 421 diagnostic trouble codes are mapped for this ECU, each with the address and the byte values measured on a real file rather than a guessed constant.
Does Map Decoder correct the checksum after patching an MDG1_MD1CP002 file?
Yes. Checksums covering the regions a patch changes are recalculated during patch generation, so the modified file is accepted by the ECU.
Work on Bosch MDG1_MD1CP002 files
Map Decoder analyses Bosch MDG1_MD1CP002 files, detects the maps and generates a verified patch with the checksum corrected.