Overview
Diagnostic data for the ME17.9.11
- Manufacturer
- Bosch
- Mapped codes
- 127
- With description
- 109
Map Decoder stores 127 distinct diagnostic trouble codes for the Bosch ME17.9.11. Each one carries the address and the byte values measured on a real file, which is what lets a removal write the value the ECU actually expects instead of a guessed constant. See DTC removal for the workflow.
Code list
ME17.9.11 diagnostic trouble codes
| Code | Description |
|---|---|
P0011 | Camshaft position (CMP), intake/left/front, bank 1 timing over advanced/system performance |
P0014 | Camshaft position (CMP) actuator, exhaust/right/rear, bank 1 -timing over -advanced/system performance |
P0030 | Heated oxygen sensor (HO2S) 1, bank 1, heater control -circuit malfunction |
P0031 | Heated oxygen sensor (HO2S) 1, bank 1, heater control -circuit low |
P0032 | Heated oxygen sensor (HO2S) 1, bank 1, heater control -circuit high |
P0036 | Heated oxygen sensor (HO2S) 2, bank 1, heater control -circuit malfunction |
P0037 | Heated oxygen sensor (HO2S) 2, bank 1, heater control -circuit low |
P0038 | Heated oxygen sensor (HO2S) 2, bank 1, heater control -circuit high |
P0076 | Intake valve control solenoid, bank 1 -circuit low |
P0077 | Intake valve control solenoid, bank 1 -circuit high |
P0079 | Exhaust valve control solenoid, bank 1 -circuit low |
P0080 | Exhaust valve control solenoid, bank 1 -circuit high |
P0106 | Manifold absolute pressure (MAF) sensor barometric pressure (BARO) sensor -range/performance problem |
P0107 | Manifold absolute pressure (MAP) sensor/barometric pressure (BARO) sensor -low input |
P0108 | Manifold absolute pressure (MAP) sensor/barometric pressure (BARO) sensor -high input |
P0111 | 'Intake air temperature (IAT) sensor''' range/performance problem' |
P0112 | Intake air temperature (IAT) sensor -low input |
P0113 | Intake air temperature (IAT) sensor -high input |
P0116 | Engine coolant temperature (ECT) sensor range/performance problem |
P0117 | Engine coolant temperature (ECT) sensor -low input |
P0118 | Engine coolant temperature (ECT) sensor -high input |
P0121 | Throttle position (TP) sensor A/accelerator pedal position (APP) sensor A -range/performance problem |
P0122 | Throttle position (TP) sensor A/accelerator pedal position (APP) sensor A -low input |
P0123 | Throttle position (TP) sensor A/accelerator pedal position (APP) sensor A -high input |
P0128 | Coolant thermostat -coolant temperature below thermostat regulating temperature |
P0130 | Heated oxygen sensor (HO2S) 1, bank 1 -circuit malfunction |
P0131 | Heated oxygen sensor (HO2S) 1, bank 1 -low voltage |
P0132 | Heated oxygen sensor (HO2S) 1, bank 1 -high voltage |
P0133 | Heated oxygen sensor (HO2S) 1, bank 1 -slow response |
P0134 | Heated oxygen sensor (HO2S) 1, bank 1 -no activity detected |
P0135 | Heated oxygen sensor (HO2S) 1, bank 1, heater control circuit malfunction |
P0136 | Heated oxygen sensor (HO2S) 2, bank 1 circuit malfunction |
P0137 | Heated oxygen sensor (HO2S) 2, bank 1 -low voltage |
P0138 | Heated oxygen sensor (HO2S) 2, bank 1 -high voltage |
P0139 | Heated oxygen sensor (HO2S) 2, bank 1 -slow response |
P0140 | Heated oxygen sensor (HO2S) 2, bank 1 no activity detected |
P0141 | Heated oxygen sensor (HO2S) 2, bank 1 heater control circuit malfunction |
P0201 | Injector 1 -circuit malfunction |
P0202 | Injector 2 -circuit malfunction |
P0203 | Injector 3 -circuit malfunction |
P0204 | Injector 4 -circuit malfunction |
P0222 | Throttle position (TP) sensor B/accelerator pedal position (APP) sensor B -low input |
P0223 | Throttle position (TP) sensor B/accelerator pedal position (APP) sensor B -high input |
P0230 | Fuel pump relay -circuit malfunction |
P0261 | Injector 1 -circuit low |
P0262 | Injector 1 -circuit high |
P0264 | Injector 2 -circuit low |
P0265 | Injector 2 -circuit high |
P0267 | Injector 3 -circuit low |
P0268 | Injector 3 -circuit high |
P0270 | Injector 4 -circuit low |
P0271 | Injector 4 -circuit high |
P0300 | Random/multiple cylinder(s) -misfire detected |
P0301 | Cylinder 1 -misfire detected |
P0302 | Cylinder 2 -misfire detected |
P0303 | Cylinder 3 -misfire detected |
P0304 | Cylinder 4 -misfire detected |
P0326 | Knock sensor (KS) 1 , bank 1 -range/performance problem |
P0335 | Crankshaft position (CKP) sensor -circuit malfunction |
P0340 | Camshaft position (CMP) sensor A, bank 1 circuit malfunction |
P0365 | Camshaft position (CMP) sensor B, bank 1 circuit malfunction |
P0420 | Catalytic converter system, bank 1 -efficiency below threshold |
P0444 | Evaporative emission (EVAP) canister purge valve open circuit |
P0445 | Evaporative emission (EVAP) canister purge valve -short circuit |
P0504 | Brake switch -A/B correlation |
P0506 | Idle speed control (ISC) system -rpm lower than expected |
P0507 | Idle speed control (ISC) system -rpm higher than expected |
P0532 | AC refrigerant pressure sensor -low input |
P0533 | AC refrigerant pressure sensor -high input |
P0557 | Brake servo pressure sensor -circuit low input |
P0558 | Brake servo pressure sensor -circuit high input |
P0562 | System voltage -low |
P0563 | System voltage -high |
P0564 | Cruise control system, multi -function switch input A -circuit malfunction |
P0605 | Engine control module (ECM) -ROM error |
P0606 | Engine control module (ECM)/powertrain control module (PCM) -processor fault |
P0616 | Starter motor relay -circuit low |
P0617 | Starter motor relay -circuit high |
P061B | Internal Control Module Torque Calculation Performance |
P0620 | Alternator, control -circuit malfunction |
P0625 | Generator field terminal -circuit low |
P0626 | Generator field terminal -circuit high |
P0630 | VIN not programmed or mismatch -ECM/PCM |
P0638 | Throttle actuator control, bank 1 -range/performance problem |
P0642 | Engine control module (ECM), knock control -defective |
P0643 | Sensor reference voltage A -circuit high |
P0645 | Air conditioning (AC) |
P0646 | AC compressor clutch relay -circuit low |
P0647 | AC compressor clutch relay -circuit high |
P0650 | Malfunction indicator lamp (MIL) -circuit malfunction |
P0704 | Clutch pedal position(CPP) switch -circuit malfunction |
P0820 | Gear lever X -Y position sensor -circuit malfunction |
P1610 | — |
P1674 | — |
P1675 | — |
P1676 | — |
P1690 | — |
P1691 | — |
P1693 | — |
P1694 | — |
P1695 | — |
P1696 | — |
P1699 | — |
P169A | — |
P2096 | Post Catalyst Fuel Trim System Too Lean Bank 1 |
P2097 | Post Catalyst Fuel Trim System Too Rich Bank 1 |
P2101 | Throttle Actuator 'A' Control Motor Circuit Range/Performance |
P2118 | Throttle Actuator Control Motor Current Range/Performance |
P2122 | Throttle/Pedal Position Sensor/Switch 'D' Circuit Low |
P2123 | Throttle/Pedal Position Sensor/Switch 'D' Circuit High |
P2127 | Throttle/Pedal Position Sensor/Switch 'E' Circuit Low |
P2128 | Throttle/Pedal Position Sensor/Switch 'E' Circuit High |
P2138 | Throttle/Pedal Pos Sensor/Switch D / E Voltage Correlation |
P2159 | Vehicle Speed Sensor 'B' Range/Performance |
P2187 | System Too Lean at Idle Bank 1 |
P2188 | System Too Rich at Idle Bank 1 |
P2191 | System Too Lean at Higher Load Bank 1 |
P2192 | System Too Rich at Higher Load Bank 1 |
P2501 | Generator Lamp/L-Terminal Circuit High |
P2502 | Charging System Voltage |
P2503 | Charging System Voltage Low |
U0001 | — |
U0101 | — |
U0155 | — |
U0164 | — |
U1111 | — |
U1112 | — |
FAQ
Bosch ME17.9.11 DTC codes — frequently asked questions
How many DTC codes does Map Decoder have for the ME17.9.11?
127 distinct diagnostic trouble codes, 109 of them with a description.
Where do these codes come from?
Each entry was measured on a real file: the address, the enabled value and the disabled value were read from an original and a modified binary. Nothing here is a generic OBD-II lookup table.
Can these codes be switched off on the ME17.9.11?
Yes — Map Decoder writes the value that was observed on this ECU rather than a guessed constant, and corrects the checksum afterwards.
Remove DTC codes on Bosch ME17.9.11
Map Decoder analyses Bosch ME17.9.11 files, detects the maps and generates a verified patch with the checksum corrected.