ECU overview
The Bosch MG1CS201 is part of the MG1 generation from Bosch. In the Map Decoder database it is linked to BMW and Mini vehicles. Coverage for this ECU is built from 12 stored modifications learned on real original and modified files.
What Map Decoder can do on an MG1CS201 file
Every operation below is backed by a stored, verified modification for MG1CS201. Nothing is listed that the software cannot actually perform on this ECU.
Lambda / O2
Disables lambda / O2 sensor monitoring in MG1CS201 without breaking fuelling.
MAF Off
Removes mass air flow sensor dependency and its diagnostics from MG1CS201.
OPF / GPF Off
Removes gasoline particulate filter logic from MG1CS201 calibrations.
Throttle Valve (TVA)
Disables throttle valve actuator control and monitoring in MG1CS201.
Map detection and patch generation for MG1CS201
Map detection
Upload an original MG1CS201 read. Map Decoder locates the relevant calibration tables automatically instead of relying on a fixed address list, so files from different software versions are handled.
Patch generation
A stored modification is only offered when it fits your binary. Region similarity and anchor signatures are checked against the uploaded file first, so a change learned on one software version is never blindly written to another.
Checksum correction
Checksums covering the regions a patch touches are recalculated as part of patch generation, so the ECU accepts the modified flash.
MG1CS201 DTC codes
Map Decoder holds 525 diagnostic trouble codes for the MG1CS201. Each entry stores the address and the byte values measured on a real file.
P0001P0010P0012P0013P0015P0030P0031P0032P0036P0037P0038P0053P0064P0072P0073P007BP007CP007DP0087P0088P00BCP00BDP0100P0101
Other MG1 ECUs
- Bosch MG1CP0024 solutions · 509 DTC
- Bosch MG1CS0012 solutions · 785 DTC
- Bosch MG1CS0022 solutions · 1,114 DTC
- Bosch MG1CS0034 solutions · 549 DTC
- Bosch MG1CS0084 solutions · 974 DTC
- Bosch MG1CS0114 solutions · 758 DTC
- Bosch MG1CS0153 solutions · 417 DTC
- Bosch MG1CS0163 solutions · 479 DTC
- Bosch MG1CS0173 solutions · 454 DTC
- Bosch MG1CS0425 solutions · 411 DTC
- Bosch MG1CS1114 solutions · 598 DTC
- Bosch MG1CS1635 solutions · 648 DTC
MG1CS201 solutions by vehicle brand
- BMW Lambda / O216 ECUs · 2040 variants
- BMW MAF Off14 ECUs · 1866 variants
- BMW Throttle Valve (TVA)7 ECUs · 1594 variants
- BMW OPF / GPF Off3 ECUs · 881 variants
- Mini Lambda / O214 ECUs · 206 variants
- Mini MAF Off12 ECUs · 206 variants
- Mini OPF / GPF Off3 ECUs · 155 variants
- Mini Throttle Valve (TVA)7 ECUs · 137 variants
Bosch MG1CS201 — frequently asked questions
What is the Bosch MG1CS201?
The MG1CS201 is an engine control unit produced by Bosch, part of the MG1 generation. It is used in BMW and Mini vehicles.
Can Map Decoder identify maps in MG1CS201 files?
Yes. Upload an original read and the relevant calibration tables are located automatically. The result is verified against the binary before any patch is offered, so a mismatched file is rejected rather than silently patched.
Which operations are supported for the Bosch MG1CS201?
Validated operations for this ECU: Lambda / O2, MAF Off, OPF / GPF Off and Throttle Valve (TVA). They come from 12 stored modifications learned on real files.
Does Map Decoder support DTC removal on the MG1CS201?
Yes. 525 diagnostic trouble codes are mapped for this ECU, each with the address and the byte values measured on a real file rather than a guessed constant.
Does Map Decoder correct the checksum after patching an MG1CS201 file?
Yes. Checksums covering the regions a patch changes are recalculated during patch generation, so the modified file is accepted by the ECU.
Work on Bosch MG1CS201 files
Map Decoder analyses Bosch MG1CS201 files, detects the maps and generates a verified patch with the checksum corrected.