Bosch EDC16CP31 ECU Solutions

Map detection, patch generation and the tuning operations Map Decoder actually supports on the Bosch EDC16CP31 engine control unit.

Bosch EDC16CP31 at a glance

Bosch EDC16CP31 ECU — supported tuning functions: DPF Off, EGR Off, Lambda / O2, MAF Off, Throttle Valve (TVA) — 344 mapped DTC codes
Bosch EDC16CP31 — supported functions, vehicle brands and example vehicle.

ECU overview

ECU manufacturer
Bosch
ECU family
EDC16
ECU model
EDC16CP31
Supported solutions
5
Mapped DTC codes
344
Vehicle brands
Mercedes

The Bosch EDC16CP31 is part of the EDC16 generation from Bosch. In the Map Decoder database it is linked to Mercedes vehicles. Coverage for this ECU is built from 41 stored modifications learned on real original and modified files.

Supported solutions

What Map Decoder can do on an EDC16CP31 file

Every operation below is backed by a stored, verified modification for EDC16CP31. Nothing is listed that the software cannot actually perform on this ECU.

DPF Off

Removes diesel particulate filter regeneration and monitoring logic from EDC16CP31 files.

EGR Off

Disables exhaust gas recirculation control in EDC16CP31 calibrations, including the related fault reporting.

Lambda / O2

Disables lambda / O2 sensor monitoring in EDC16CP31 without breaking fuelling.

MAF Off

Removes mass air flow sensor dependency and its diagnostics from EDC16CP31.

Throttle Valve (TVA)

Disables throttle valve actuator control and monitoring in EDC16CP31.

How it works

Map detection and patch generation for EDC16CP31

Map detection

Upload an original EDC16CP31 read. Map Decoder locates the relevant calibration tables automatically instead of relying on a fixed address list, so files from different software versions are handled.

Patch generation

A stored modification is only offered when it fits your binary. Region similarity and anchor signatures are checked against the uploaded file first, so a change learned on one software version is never blindly written to another.

Checksum correction

Checksums covering the regions a patch touches are recalculated as part of patch generation, so the ECU accepts the modified flash.

DTC

EDC16CP31 DTC codes

Map Decoder holds 344 diagnostic trouble codes for the EDC16CP31. Each entry stores the address and the byte values measured on a real file.

  • P0001
  • P0003
  • P0004
  • P0016
  • P0030
  • P0031
  • P0032
  • P0050
  • P0051
  • P0052
  • P0053
  • P0059
  • P0069
  • P0071
  • P0072
  • P0073
  • P0087
  • P0088
  • P0089
  • P0090
  • P0091
  • P0092
  • P0097
  • P0098

All 344 EDC16CP31 DTC codes

Related ECUs

Other EDC16 ECUs

Vehicles

Vehicle brands using the EDC16CP31

Brand + solution

EDC16CP31 solutions by vehicle brand

Related families

Other Bosch ECU families

FAQ

Bosch EDC16CP31 — frequently asked questions

What is the Bosch EDC16CP31?

The EDC16CP31 is an engine control unit produced by Bosch, part of the EDC16 generation. It is used in Mercedes vehicles.

Can Map Decoder identify maps in EDC16CP31 files?

Yes. Upload an original read and the relevant calibration tables are located automatically. The result is verified against the binary before any patch is offered, so a mismatched file is rejected rather than silently patched.

Which operations are supported for the Bosch EDC16CP31?

Validated operations for this ECU: DPF Off, EGR Off, Lambda / O2, MAF Off and Throttle Valve (TVA). They come from 41 stored modifications learned on real files.

Does Map Decoder support DTC removal on the EDC16CP31?

Yes. 344 diagnostic trouble codes are mapped for this ECU, each with the address and the byte values measured on a real file rather than a guessed constant.

Does Map Decoder correct the checksum after patching an EDC16CP31 file?

Yes. Checksums covering the regions a patch changes are recalculated during patch generation, so the modified file is accepted by the ECU.

Work on Bosch EDC16CP31 files

Map Decoder analyses Bosch EDC16CP31 files, detects the maps and generates a verified patch with the checksum corrected.