Bosch EDC16CP35 at a glance
ECU overview
The Bosch EDC16CP35 is part of the EDC16 generation from Bosch. In the Map Decoder database it is linked to BMW and Mini vehicles. Coverage for this ECU is built from 14 stored modifications learned on real original and modified files.
What Map Decoder can do on an EDC16CP35 file
Every operation below is backed by a stored, verified modification for EDC16CP35. Nothing is listed that the software cannot actually perform on this ECU.
DPF Off
Removes diesel particulate filter regeneration and monitoring logic from EDC16CP35 files.
EGR Off
Disables exhaust gas recirculation control in EDC16CP35 calibrations, including the related fault reporting.
Lambda / O2
Disables lambda / O2 sensor monitoring in EDC16CP35 without breaking fuelling.
MAF Off
Removes mass air flow sensor dependency and its diagnostics from EDC16CP35.
Map detection and patch generation for EDC16CP35
Map detection
Upload an original EDC16CP35 read. Map Decoder locates the relevant calibration tables automatically instead of relying on a fixed address list, so files from different software versions are handled.
Patch generation
A stored modification is only offered when it fits your binary. Region similarity and anchor signatures are checked against the uploaded file first, so a change learned on one software version is never blindly written to another.
Checksum correction
Checksums covering the regions a patch touches are recalculated as part of patch generation, so the ECU accepts the modified flash.
EDC16CP35 DTC codes
Map Decoder holds 1,940 diagnostic trouble codes for the EDC16CP35. Each entry stores the address and the byte values measured on a real file.
C0000C0001C0002C0003C0010C0011C0012C0013C0020C0021C0022C0023C0030C0031C0032C0033C0060C0061C0062C0063C0070C0071C0072C0073
Other EDC16 ECUs
- Bosch EDC16C26 solutions · 475 DTC
- Bosch EDC16C315 solutions · 2,128 DTC
- Bosch EDC16C345 solutions · 1,236 DTC
- Bosch EDC16C354 solutions · 1,684 DTC
- Bosch EDC16C395 solutions · 648 DTC
- Bosch EDC16C39 EURO55 solutions · 631 DTC
- Bosch EDC16C85 solutions · 169 DTC
- Bosch EDC16C94 solutions · 118 DTC
- Bosch EDC16CP315 solutions · 344 DTC
- Bosch EDC16CP344 solutions · 1,323 DTC
- Bosch EDC16U315 solutions · 693 DTC
- Bosch EDC16U344 solutions · 753 DTC
EDC16CP35 solutions by vehicle brand
- BMW Lambda / O216 ECUs · 2040 variants
- BMW MAF Off14 ECUs · 1866 variants
- BMW DPF Off12 ECUs · 1138 variants
- BMW EGR Off12 ECUs · 1138 variants
- Mini Lambda / O214 ECUs · 206 variants
- Mini MAF Off12 ECUs · 206 variants
- Mini DPF Off11 ECUs · 109 variants
- Mini EGR Off11 ECUs · 109 variants
Bosch EDC16CP35 — frequently asked questions
What is the Bosch EDC16CP35?
The EDC16CP35 is an engine control unit produced by Bosch, part of the EDC16 generation. It is used in BMW and Mini vehicles.
Can Map Decoder identify maps in EDC16CP35 files?
Yes. Upload an original read and the relevant calibration tables are located automatically. The result is verified against the binary before any patch is offered, so a mismatched file is rejected rather than silently patched.
Which operations are supported for the Bosch EDC16CP35?
Validated operations for this ECU: DPF Off, EGR Off, Lambda / O2 and MAF Off. They come from 14 stored modifications learned on real files.
Does Map Decoder support DTC removal on the EDC16CP35?
Yes. 1,940 diagnostic trouble codes are mapped for this ECU, each with the address and the byte values measured on a real file rather than a guessed constant.
Does Map Decoder correct the checksum after patching an EDC16CP35 file?
Yes. Checksums covering the regions a patch changes are recalculated during patch generation, so the modified file is accepted by the ECU.
Work on Bosch EDC16CP35 files
Map Decoder analyses Bosch EDC16CP35 files, detects the maps and generates a verified patch with the checksum corrected.