ECU overview
- ECU manufacturer
- Bosch
- ECU family
- MD1
- ECU model
- MD1CP017
- Supported solutions
- 5
- Mapped DTC codes
- 672
- Vehicle brands
- Land Rover
The Bosch MD1CP017 is part of the MD1 generation from Bosch. In the Map Decoder database it is linked to Land Rover vehicles. Coverage for this ECU is built from 7 stored modifications learned on real original and modified files.
What Map Decoder can do on an MD1CP017 file
Every operation below is backed by a stored, verified modification for MD1CP017. Nothing is listed that the software cannot actually perform on this ECU.
AdBlue / SCR Off
Turns off the SCR / AdBlue dosing strategy and its countdown logic in MD1CP017.
DPF Off
Removes diesel particulate filter regeneration and monitoring logic from MD1CP017 files.
Lambda / O2
Disables lambda / O2 sensor monitoring in MD1CP017 without breaking fuelling.
NOx Off
Disables NOx sensor monitoring and the associated fault paths in MD1CP017.
Throttle Valve (TVA)
Disables throttle valve actuator control and monitoring in MD1CP017.
Map detection and patch generation for MD1CP017
Map detection
Upload an original MD1CP017 read. Map Decoder locates the relevant calibration tables automatically instead of relying on a fixed address list, so files from different software versions are handled.
Patch generation
A stored modification is only offered when it fits your binary. Region similarity and anchor signatures are checked against the uploaded file first, so a change learned on one software version is never blindly written to another.
Checksum correction
Checksums covering the regions a patch touches are recalculated as part of patch generation, so the ECU accepts the modified flash.
MD1CP017 DTC codes
Map Decoder holds 672 diagnostic trouble codes for the MD1CP017. Each entry stores the address and the byte values measured on a real file.
P0016P0030P0031P0032P0033P0034P0035P0039P003AP003BP0045P0046P0047P0048P004AP004BP004CP004DP0069P006BP0071P0072P0073P0087
Other MD1 ECUs
- Bosch MD1CP0018 solutions · 670 DTC
- Bosch MD1CP0047 solutions · 1,193 DTC
- Bosch MD1CP0077 solutions · 751 DTC
- Bosch MD1CS0017 solutions · 1,641 DTC
- Bosch MD1CS00312 solutions · 559 DTC
- Bosch MD1CS00410 solutions · 1,153 DTC
- Bosch MD1CS0058 solutions · 426 DTC
- Bosch MD1CS0068 solutions · 320 DTC
- Bosch MD1CS0146 solutions · 1,092 DTC
- Bosch MD1CS0168 solutions · 557 DTC
- Bosch MD1CS0276 solutions · 445 DTC
- Bosch MD1CS06910 solutions · 728 DTC
Vehicle brands using the MD1CP017
MD1CP017 solutions by vehicle brand
- Land Rover DPF Off6 ECUs · 160 variants
- Land Rover Lambda / O25 ECUs · 104 variants
- Land Rover AdBlue / SCR Off4 ECUs · 100 variants
- Land Rover Throttle Valve (TVA)4 ECUs · 93 variants
- Land Rover NOx Off3 ECUs · 52 variants
Bosch MD1CP017 — frequently asked questions
What is the Bosch MD1CP017?
The MD1CP017 is an engine control unit produced by Bosch, part of the MD1 generation. It is used in Land Rover vehicles.
Can Map Decoder identify maps in MD1CP017 files?
Yes. Upload an original read and the relevant calibration tables are located automatically. The result is verified against the binary before any patch is offered, so a mismatched file is rejected rather than silently patched.
Which operations are supported for the Bosch MD1CP017?
Validated operations for this ECU: AdBlue / SCR Off, DPF Off, Lambda / O2, NOx Off and Throttle Valve (TVA). They come from 7 stored modifications learned on real files.
Does Map Decoder support DTC removal on the MD1CP017?
Yes. 672 diagnostic trouble codes are mapped for this ECU, each with the address and the byte values measured on a real file rather than a guessed constant.
Does Map Decoder correct the checksum after patching an MD1CP017 file?
Yes. Checksums covering the regions a patch changes are recalculated during patch generation, so the modified file is accepted by the ECU.
Work on Bosch MD1CP017 files
Map Decoder analyses Bosch MD1CP017 files, detects the maps and generates a verified patch with the checksum corrected.