Map Decoder

Bosch MD1CP061 ECU Solutions

Map detection, patch generation and the tuning operations Map Decoder actually supports on the Bosch MD1CP061 engine control unit.

ECU overview

ECU manufacturer
Bosch
ECU family
MD1
ECU model
MD1CP061
Supported solutions
5
Mapped DTC codes
440
Vehicle brands
Audi, Ford, Porsche, Seat, Skoda, VW

The Bosch MD1CP061 is part of the MD1 generation from Bosch. In the Map Decoder database it is linked to VW, Ford, Audi, Seat, Skoda and Porsche vehicles. Coverage for this ECU is built from 20 stored modifications learned on real original and modified files.

Supported solutions

What Map Decoder can do on an MD1CP061 file

Every operation below is backed by a stored, verified modification for MD1CP061. Nothing is listed that the software cannot actually perform on this ECU.

AdBlue / SCR Off

Turns off the SCR / AdBlue dosing strategy and its countdown logic in MD1CP061.

DPF Off

Removes diesel particulate filter regeneration and monitoring logic from MD1CP061 files.

EGR Off

Disables exhaust gas recirculation control in MD1CP061 calibrations, including the related fault reporting.

MAF Off

Removes mass air flow sensor dependency and its diagnostics from MD1CP061.

NOx Off

Disables NOx sensor monitoring and the associated fault paths in MD1CP061.

How it works

Map detection and patch generation for MD1CP061

Map detection

Upload an original MD1CP061 read. Map Decoder locates the relevant calibration tables automatically instead of relying on a fixed address list, so files from different software versions are handled.

Patch generation

A stored modification is only offered when it fits your binary. Region similarity and anchor signatures are checked against the uploaded file first, so a change learned on one software version is never blindly written to another.

Checksum correction

Checksums covering the regions a patch touches are recalculated as part of patch generation, so the ECU accepts the modified flash.

DTC

MD1CP061 DTC codes

Map Decoder holds 440 diagnostic trouble codes for the MD1CP061. Each entry stores the address and the byte values measured on a real file.

  • P0016
  • P003A
  • P0045
  • P0046
  • P0047
  • P0048
  • P0069
  • P006A
  • P0071
  • P0072
  • P0073
  • P007B
  • P007C
  • P007D
  • P0087
  • P0088
  • P0089
  • P008A
  • P008B
  • P0090
  • P0091
  • P0092
  • P00F2
  • P00F3

All 440 MD1CP061 DTC codes

Related ECUs

Other MD1 ECUs

Vehicles

Vehicle brands using the MD1CP061

Brand + solution

MD1CP061 solutions by vehicle brand

Related families

Other Bosch ECU families

FAQ

Bosch MD1CP061 — frequently asked questions

What is the Bosch MD1CP061?

The MD1CP061 is an engine control unit produced by Bosch, part of the MD1 generation. It is used in Audi, Ford, Porsche, Seat, Skoda and VW vehicles.

Can Map Decoder identify maps in MD1CP061 files?

Yes. Upload an original read and the relevant calibration tables are located automatically. The result is verified against the binary before any patch is offered, so a mismatched file is rejected rather than silently patched.

Which operations are supported for the Bosch MD1CP061?

Validated operations for this ECU: AdBlue / SCR Off, DPF Off, EGR Off, MAF Off and NOx Off. They come from 20 stored modifications learned on real files.

Does Map Decoder support DTC removal on the MD1CP061?

Yes. 440 diagnostic trouble codes are mapped for this ECU, each with the address and the byte values measured on a real file rather than a guessed constant.

Does Map Decoder correct the checksum after patching an MD1CP061 file?

Yes. Checksums covering the regions a patch changes are recalculated during patch generation, so the modified file is accepted by the ECU.

Work on Bosch MD1CP061 files

Map Decoder analyses Bosch MD1CP061 files, detects the maps and generates a verified patch with the checksum corrected.

Talk to UsSee Pricing