ECU overview
The Siemens SID310 is part of the SID generation from Siemens. In the Map Decoder database it is linked to Renault and Dacia vehicles. Coverage for this ECU is built from 46 stored modifications learned on real original and modified files.
What Map Decoder can do on an SID310 file
Every operation below is backed by a stored, verified modification for SID310. Nothing is listed that the software cannot actually perform on this ECU.
AdBlue / SCR Off
Turns off the SCR / AdBlue dosing strategy and its countdown logic in SID310.
Catalyst Off
Disables catalyst efficiency monitoring in SID310.
DPF Off
Removes diesel particulate filter regeneration and monitoring logic from SID310 files.
EGR Off
Disables exhaust gas recirculation control in SID310 calibrations, including the related fault reporting.
Lambda / O2
Disables lambda / O2 sensor monitoring in SID310 without breaking fuelling.
MAF Off
Removes mass air flow sensor dependency and its diagnostics from SID310.
NOx Off
Disables NOx sensor monitoring and the associated fault paths in SID310.
Stage 1
Software-only performance calibration for SID310, with the supporting limiter changes.
Throttle Valve (TVA)
Disables throttle valve actuator control and monitoring in SID310.
Map detection and patch generation for SID310
Map detection
Upload an original SID310 read. Map Decoder locates the relevant calibration tables automatically instead of relying on a fixed address list, so files from different software versions are handled.
Patch generation
A stored modification is only offered when it fits your binary. Region similarity and anchor signatures are checked against the uploaded file first, so a change learned on one software version is never blindly written to another.
Checksum correction
Checksums covering the regions a patch touches are recalculated as part of patch generation, so the ECU accepts the modified flash.
SID310 DTC codes
Map Decoder holds 1,086 diagnostic trouble codes for the SID310. Each entry stores the address and the byte values measured on a real file.
P0001P0002P0003P0004P0005P0006P0007P0008P0009P000AP000BP000CP000DP000EP000FP0010P0011P0013P0016P0018P0019P001AP0029P002A
Other SID ECUs
- Siemens SID2064 solutions · 314 DTC
- Siemens SID2085 solutions · 547 DTC
- Siemens SID2094 solutions · 429 DTC
- Siemens SID2118 solutions · 566 DTC
- Siemens SID2128 solutions · 508 DTC
- Siemens SID2136 solutions · 513 DTC
- Siemens SID3054 solutions · 319 DTC
- Siemens SID3076 solutions · 719 DTC
- Siemens SID3218 solutions · 421 DTC
- Siemens SID803A6 solutions · 358 DTC
- Siemens SID8076 solutions · 547 DTC
- Siemens SID807 EVO5 solutions · 547 DTC
SID310 solutions by vehicle brand
- Renault DPF Off14 ECUs · 428 variants
- Renault EGR Off15 ECUs · 428 variants
- Renault MAF Off10 ECUs · 316 variants
- Renault Lambda / O215 ECUs · 302 variants
- Renault Throttle Valve (TVA)13 ECUs · 298 variants
- Renault Catalyst Off8 ECUs · 233 variants
- Renault AdBlue / SCR Off5 ECUs · 228 variants
- Renault Stage 15 ECUs · 223 variants
- Renault NOx Off4 ECUs · 156 variants
- Dacia Lambda / O212 ECUs · 53 variants
- Dacia DPF Off6 ECUs · 47 variants
- Dacia EGR Off6 ECUs · 47 variants
Other Siemens ECU families
- EMS8 ECUs
Siemens SID310 — frequently asked questions
What is the Siemens SID310?
The SID310 is an engine control unit produced by Siemens, part of the SID generation. It is used in Dacia, Mercedes, Nissan and Renault vehicles.
Can Map Decoder identify maps in SID310 files?
Yes. Upload an original read and the relevant calibration tables are located automatically. The result is verified against the binary before any patch is offered, so a mismatched file is rejected rather than silently patched.
Which operations are supported for the Siemens SID310?
Validated operations for this ECU: AdBlue / SCR Off, Catalyst Off, DPF Off, EGR Off, Lambda / O2, MAF Off, NOx Off, Stage 1 and Throttle Valve (TVA). They come from 46 stored modifications learned on real files.
Does Map Decoder support DTC removal on the SID310?
Yes. 1,086 diagnostic trouble codes are mapped for this ECU, each with the address and the byte values measured on a real file rather than a guessed constant.
Does Map Decoder correct the checksum after patching an SID310 file?
Yes. Checksums covering the regions a patch changes are recalculated during patch generation, so the modified file is accepted by the ECU.
Work on Siemens SID310 files
Map Decoder analyses Siemens SID310 files, detects the maps and generates a verified patch with the checksum corrected.