Map Decoder

Siemens SID807 EVO ECU Solutions

Map detection, patch generation and the tuning operations Map Decoder actually supports on the Siemens SID807 EVO engine control unit.

ECU overview

ECU manufacturer
Siemens
ECU family
SID
ECU model
SID807 EVO
Supported solutions
5
Mapped DTC codes
547
Vehicle brands
Citroen, Ford, Peugeot

The Siemens SID807 EVO is part of the SID generation from Siemens. In the Map Decoder database it is linked to Ford, Citroen and Peugeot vehicles. Coverage for this ECU is built from 19 stored modifications learned on real original and modified files.

Supported solutions

What Map Decoder can do on an SID807 EVO file

Every operation below is backed by a stored, verified modification for SID807 EVO. Nothing is listed that the software cannot actually perform on this ECU.

Additive (Eolys) Off

Disables the fuel additive (Eolys) system and its level monitoring in SID807 EVO.

DPF Off

Removes diesel particulate filter regeneration and monitoring logic from SID807 EVO files.

EGR Off

Disables exhaust gas recirculation control in SID807 EVO calibrations, including the related fault reporting.

MAF Off

Removes mass air flow sensor dependency and its diagnostics from SID807 EVO.

Throttle Valve (TVA)

Disables throttle valve actuator control and monitoring in SID807 EVO.

How it works

Map detection and patch generation for SID807 EVO

Map detection

Upload an original SID807 EVO read. Map Decoder locates the relevant calibration tables automatically instead of relying on a fixed address list, so files from different software versions are handled.

Patch generation

A stored modification is only offered when it fits your binary. Region similarity and anchor signatures are checked against the uploaded file first, so a change learned on one software version is never blindly written to another.

Checksum correction

Checksums covering the regions a patch touches are recalculated as part of patch generation, so the ECU accepts the modified flash.

DTC

SID807 EVO DTC codes

Map Decoder holds 547 diagnostic trouble codes for the SID807 EVO. Each entry stores the address and the byte values measured on a real file.

  • P0001
  • P0002
  • P0003
  • P0004
  • P0016
  • P0017
  • P0030
  • P0031
  • P0032
  • P0045
  • P0047
  • P0048
  • P0053
  • P0069
  • P0070
  • P0072
  • P0073
  • P0074
  • P0087
  • P0088
  • P0093
  • P0095
  • P0096
  • P0097

All 547 SID807 EVO DTC codes

Related ECUs

Other SID ECUs

Vehicles

Vehicle brands using the SID807 EVO

Brand + solution

SID807 EVO solutions by vehicle brand

Related families

Other Siemens ECU families

FAQ

Siemens SID807 EVO — frequently asked questions

What is the Siemens SID807 EVO?

The SID807 EVO is an engine control unit produced by Siemens, part of the SID generation. It is used in Citroen, Ford and Peugeot vehicles.

Can Map Decoder identify maps in SID807 EVO files?

Yes. Upload an original read and the relevant calibration tables are located automatically. The result is verified against the binary before any patch is offered, so a mismatched file is rejected rather than silently patched.

Which operations are supported for the Siemens SID807 EVO?

Validated operations for this ECU: Additive (Eolys) Off, DPF Off, EGR Off, MAF Off and Throttle Valve (TVA). They come from 19 stored modifications learned on real files.

Does Map Decoder support DTC removal on the SID807 EVO?

Yes. 547 diagnostic trouble codes are mapped for this ECU, each with the address and the byte values measured on a real file rather than a guessed constant.

Does Map Decoder correct the checksum after patching an SID807 EVO file?

Yes. Checksums covering the regions a patch changes are recalculated during patch generation, so the modified file is accepted by the ECU.

Work on Siemens SID807 EVO files

Map Decoder analyses Siemens SID807 EVO files, detects the maps and generates a verified patch with the checksum corrected.

Talk to UsSee Pricing